As an Amazon Associate I earn from qualifying purchases. Some links on this page may earn RealIRacing a commission at no extra cost to you. Gear I personally race on is called out as such; other picks are researched recommendations.

If a car like the Skip Barber feels twitchy, check rotation before anything else. You can copy someone's force feedback numbers and calibrate the pedals, and still every small correction sends the nose further than you want. The cause is often not force feedback at all. The wheelbase is set to one rotation, the car expects another, and every degree you turn your hands is translated into the wrong amount of front-wheel angle.

Rotation and steering ratio are the least glamorous settings on a sim rig, and they shape how every car feels more than most of the numbers people argue about online. This guide covers what each one means, how iRacing handles them, and a sensible setup for a MOZA R9, whether you pair it with CRP2 pedals or something else.

Degrees of rotation: what the number means

Degrees of rotation is how far the wheel turns from full left lock to full right lock. A road car is usually somewhere around ~900° lock to lock. A GT3 car is much quicker, often around ~400-500°. Formula cars are quicker still, and a dirt sprint car or an oval stock car has its own figure again. Each real car has a steering lock built into its rack, and iRacing models that for every car in the service.

Your wheelbase also has a rotation setting. If the wheelbase allows ~1080° and the car only has ~480°, something has to reconcile the two. If nothing does, either the car turns far too slowly for your hands, or it turns at the right rate but your wheel keeps spinning past the point where the virtual front wheels have stopped.

Soft lock and why you want it

Soft lock is the wheelbase physically resisting rotation once you reach the car's real steering lock. With soft lock working, turning the wheel to the stop feels like hitting the end of a real rack, and the 1:1 relationship between your hands and the virtual wheel holds all the way across.

On a direct drive base this is one of the clearest upgrades over older gear. A belt or gear wheel can usually do it too, but with less torque behind the stop. If you are curious how the torque tiers compare, I go through them in wheel torque tiers explained.

How iRacing handles rotation

iRacing knows the real steering lock of each car. With a supported wheelbase, the sim can tell the base to match that lock automatically when you load a car, so a GT3 and an IndyCar each get their own rotation without you touching anything. The exact switch lives in your wheelbase software, and the name varies by brand, so check the game-controlled rotation option in Pit House, Fanatec's driver or whatever your base uses.

When it works, you set the wheelbase to a wide maximum, calibrate once in iRacing, and the sim narrows the range per car. When it is not working, every car shares one rotation, and that is when cars start to feel wrong in ways that are easy to blame on force feedback.

Calibrating so iRacing reads the wheel correctly

  1. In your wheelbase software, set the maximum rotation to a wide value and enable the option that lets the game control rotation.
  2. In iRacing, run the controller calibration and turn the wheel through the full range the wizard asks for. Centre it carefully when prompted.
  3. Load a car with a quick steering rack, such as a GT3, and turn to full lock in the garage view. The virtual wheel and your wheel should stop together.
  4. Load a car with a slow rack, such as a road car or a stock car, and repeat. If both match, rotation is handled.
Check this first

If the on-screen wheel keeps turning after your wheel hits soft lock, or stops before it, redo the calibration before you touch anything else. Many strange steering complaints trace back to a calibration done with the wrong range.

Steering ratio is a different thing

Rotation is about your wheel matching the car's wheel. Steering ratio is about how much the car's front tyres turn for each degree of the car's steering wheel. It lives in the car, not on your rig. A quicker ratio means less hand movement for the same front-wheel angle.

Some cars in iRacing let you change the ratio in the garage, often oval cars, where drivers tune how lazy or responsive the car feels on entry. On most road cars it is fixed. If a car offers the adjustment, treat it as part of the setup: a quicker ratio can help in tight hairpins and make the car nervous at speed, and a slower one does the reverse.

Why you should not shrink rotation to feel faster

It is tempting to cut rotation on a slow road car so it feels sharper. That breaks the 1:1 relationship. Your hands turn ~90° and the car turns as if you had turned much more. It can feel quick for a lap, and then every correction overshoots, because your brain is calibrated to real hand movements. Catching a slide becomes harder, which I wrote about in saving a slide before the spin.

If a car feels too slow to steer, that is usually how the real car is. The better fix is technique, or a setup change through steering ratio where the car allows it.

Rotation and force feedback together

Rotation changes how force feedback feels even when the force numbers stay the same. With a quick rack, small hand movements produce large changes in front-tyre load, so the wheel can feel heavier and busier. With a slow rack, the same forces are spread over more wheel travel. If you just fixed your rotation and the wheel suddenly feels different, give it a few sessions before you start changing strength. Baseline numbers are in MOZA R9 iRacing settings, and the theory behind them is in iRacing force feedback explained.

Ovals and dirt

Oval cars run small steering inputs for long periods, and some drivers like a slower effective response there for smoother hands. Dirt cars are the opposite: big, fast corrections, where a soft lock that matches the car is what lets you catch the rear without fighting the wheel. Use the same calibration approach for both and let iRacing set the lock, then tune feel with force feedback and, where available, the garage ratio. More on oval-specific settings in sim racing wheel settings for ovals.

A sensible setup

Once rotation is right, a car like the Skip Barber should stop feeling twitchy and start feeling like a light, quick car, which is what it is. Small corrections go where you expect, and you stop blaming the force feedback for problems it never caused.

The gear in this guide
PickWhy it made the listTested?
MOZA R9 Direct Drive Wheelbase9 N·m direct drive — the base bolted to my rig right nowRaced on
MOZA R12 Direct Drive Wheelbasehigh-end direct drive, maximum headroomResearched pick
Fanatec CSL DDentry direct drive with Fanatec’s ecosystemResearched pick

As an Amazon Associate I earn from qualifying purchases. Some links are affiliate links — I may earn a commission at no cost to you.

From the RealiRacing shop

Before your next session, free up your rig. NWM PitStop is the clean-up and stream-priority script set we run before every session; our own product, not a third-party pick. See NWM PitStop →

Watch it, don't just read about it

I stream and upload iRacing races on my MOZA R9 rig — real laps, real force feedback, real mistakes. See the gear from this guide working before you spend a cent.

▶ Subscribe on YouTube

Skip the trial and error

The force-feedback, pedal and baseline settings I actually race, written up as setup packs for MOZA, iRacing, ACC and Le Mans Ultimate. The opening section of each pack is free to read.

See the setup packs →

Free FFB tuning checklist

The order I tune force feedback in, from rig to wheelbase software to iRacing, plus the clipping check. Enter your email and the checklist opens right here. No spam, unsubscribe anytime.

See the privacy notice.

FAQ

What wheel rotation should I use in iRacing?

Set your wheelbase to a wide maximum, enable the option that lets the game control rotation, and calibrate once in iRacing. The sim then matches each car's real steering lock, so you do not need a single number for every car.

What is soft lock on a sim racing wheel?

Soft lock is the wheelbase resisting further rotation once you reach the car's real steering lock, so the wheel stops where the virtual steering wheel stops.

Is steering ratio the same as degrees of rotation?

No. Rotation is how far your physical wheel turns. Steering ratio is how much the car's front tyres turn per degree of the car's steering wheel, and only some cars let you adjust it in the garage.

Why does my car feel twitchy in iRacing?

A common cause is rotation that does not match the car, often after a calibration with the wrong range. Check that your wheel and the on-screen wheel stop together at full lock before changing force feedback.